GST-EL-830-6 On-line Solar Cell EL Tester
Introduction
This Equipment is mainly used for solar module defect detection and special test for production process control, to test whether solar cells have material defects, sintering defects, process pollution, slivers and inferior pieces etc. Or not.
Specifications
1. Control Mode: PLC+PC
2. Power Supply: AV220V 50Hz Single Phrase
3. Intensity of Air Pressure: 6-8kg/cm2
4. Air Pressure: 0.4~0.6Mpa
Warranty
One year of free services and repairs.
Customization offered.
Data
| Type | Solar Module Defects Tester | Weight | 100-500Kg |
| Power Source | AC380V | Dimension | Less Than 2300mm*1900mm*1500mm |
Parameter
| Name | Solar Cell Module EL Tester |
| Resolution Ratio | 6 million pixels 2048*1300 |
| Test Imaging Time | 5-10 sec |
| Test Period | 30-40 sec |
| Detector Manufacturer | Japan SONY |
| Detector Category | Cold Light CCD |
| Image Surface Noise | Slight |
| Management Software | Independent R&D Chinese-English Recognition and Management Software. Automatic image saving, query, statistics,printing etc. |
| Type of Cylinder | Process Pollution,Material Defects,subfissure,fragment,Broken Bars,Faulty Soldering,Low Efficiency etc. |
| Tested Module Type | Solar Cell Module/Battery String/(monocrystal/polycrystal/thin film) |
| Tested Module Size | Standard Size:1000MM*2000MM(Customized Service Can Be Offered) |
| Current & Voltage | 0-20A,0-100V(Programmable Power Supply) |
| Work Environment | Temperature: 15-40ºC Humidity: 10-75% |
){kind=link}